Palm Tree and Oasis Features Finished

I've managed to finish the palm tree cluster bases and the two oasis features this afternoon, adding some dry brushing to the trees and some gloss varnish to the ponds, having scrapped the acrylic sheet as it didn't look very good. I'm sure if I was making 28mm oasis terrain the acrylic sheeting would be fine but in 15mm it looked overscale. I also spilled some PVA onto it by mistake which spoiled the water effect. I may add another coat of gloss varnish to the ponds later on to give a bit more of a reflective surface but I think like look fine as they are.

The tree cluster bases came out okay in the end but I suspect that they will shed their green paint if they get handled too much and will need to be repaired as a result. I ended up with eleven of these as some of the tree trunk prongs snapped off, so I've saved the broken ones for other things. I will be making some more arid acacia type tree bases to match these ones anyway, so if they play up I can use those instead. I have had enough of terrain making for the moment, so will be doing some figure and vehicle painting next instead.