The 50mm panel pins arrived yesterday so I used one to make a prototype Level 4 flight stand for Wings at War, in this case to match my existing 40mm, 30mm and 20mm jungle ones. The panel pin is a bit thicker than the others but it's not a massive difference and hardly noticeable once you plonk a plane on the top. I am probably going to replace my Level 1 stands with these, so that I can use the existing Level 2, 3 and 4 stands as Level 1, 2 and 3, with the new ones as Level 4.
Perfect timing for your post. I also made 4 test stands for Wings at War Thud Ridge yesterday. I am using 20, 30, 40, and 50mm nails as well. Thank you for sharing your idea as I have copied it. Now I need to figure out what I am going to do for the base.
ReplyDeleteGlad it was helpful :O)
ReplyDelete