Welcome to my blog. I have upwards of 100 projects in various stages of incompletion or total abandonment, so you may well find something of interest if you rummage about a bit. I concentrate on solo air and naval wargaming but other 'skirmishy' things quite often pop up out of nowhere, only to disappear again after something else grabs my attention. I even finish the occasional project now and again!
Friday, 30 September 2022
MiG Alley Weekend Missions
Thursday, 29 September 2022
US Pre-dreadnought Squadron 1890's
USS Charleston |
Wednesday, 28 September 2022
Chilean Pre-dreadnought Squadron 1890's
I'm making an early start to next month's naval project, the Chilean Civil War and 'What If?' naval arms race, with the small but powerful Chilean pre-dreadnought fleet. This consists of the armoured cruiser O'Higgins, the protected cruiser Ministro Zenteno and the protected cruiser Esmeralda, the latter strictly speaking a bit of a stretch, as she was sold to Japan to become the Izumo in 1894. The scouting force for the squadron consists of the two torpedo gunboats Almirante Lynch and Almirante Condell. The squadron will also be backed up by the pre-dreadnought battleship Capitan Prat, once the model is available from Tumbling Dice, with a collier and a couple of supply ships tagging along for logistical support. I'm aiming to base up and undercoat all of these by the end of the week, given a chance.
Muddying the Waters
Tuesday, 27 September 2022
Dawn of Iron War of the Pacific
Hurricane Bagging over Tobruk
Monday, 26 September 2022
MiG Alley Mission Cards
USN / USMC |
USAF |
UN (RN/RAN/SAAF/ROKAF) |
NKAF / PLAAF |
The deck consists of ten cards for each side. After reviewing each of the mission cards, one card must be discarded, leaving a total of three missions for the game. In addition, one of the three remaining cards may be discarded and a replacement card drawn. This card may not be discarded and the mission must be carried out.
If for any reason a mission cannot be carried out, for example a night mission is chosen but the other side only select daylight missions, an alternative card may be drawn at random from the deck. This will require some negotiation before the game to decide if it is a night or day set up and the deck could be compiled beforehand as required; multiples of some cards would be needed if this was the case e.g. four or five Night Fighter cards instead of just the one.
The three missions for each side must not be revealed to the opposing UN or Communist player. The required sections and targets for the three missions should now be organised and the missions carried out according to the objectives set out on each mission card. A record should be kept of any successful missions completed during the game.
When the game ends and a Victory Target has been attained by one side or the other, each player should roll 1D3+1 for each successful mission that they have completed during the game. This should be added to the Victory Point total for their side. The player with the highest overall Victory Point score wins the game.
Sunday, 25 September 2022
1/2400th Chilean Pre-Dreadnought Project
The next project on my workbench will be a pre-dreadnought naval one, focussed on the Chilean Civil War of 1891 but with a 'What If?' angle, allowing me to include both US and RN warships for a counterfactual mini-campaign of linked scenarios in the early to mid-1890's. This will kill two birds with one stone, allowing me to work out how to paint and base the Tumbling Dice models but also give me the chance to try out the Broadside and Salvo rules. I'm also going to use A and A Game Engineering's Tsushima rules for small scale actions, where there are only one or two ships involved. It will hopefully also lead on to the French and Italian pre-dreadnoughts that I've prepared previously actually getting a lick of paint!
Saturday, 24 September 2022
Flames Above the Falklands Finished
I finally got round to finishing off the 1/600th aircraft for Flames Above the Falklands that I started way back before the summer holidays. I'd been putting this off due to the fiddly decals but it wasn't actually that difficult to do, mainly due to the quality of the Flight Deck Decals transfers. The paint work isn't that great but they are definitely useable, if not for a whole game then for some dogfighting. That's another one of my 'to do' projects done, so time to move on to something else on the list.
Friday, 23 September 2022
Naval November (and October)
I realized today that my WW1 German insignia decals are either too small or out of register, so I'm going to have to postpone finishing the aircraft until I get some more, although I can complete the RFC models and my Falklands War jets this weekend. After that, I really want a break from air wargaming, so I'm going to dedicate the next couple of months to a naval project from my 'to do' list. This will probably be a pre-dreadnought or late ironclad project, with my Chilean and US cruisers as a starting point, but it could also be the WW1 Steamer Wars Lake Tanganyika project instead. I'll make up my mind over the weekend and then make a start, as I really want get another full-on new naval project stowed away by the end of 2022.
Thursday, 22 September 2022
Home Stretch Hat Trick
Airco DH4's |
Halberstadt CLII's |
Friedrichshafen GIII's |
I'm on the home stretch with the 1/600th scale 1917 WW1 project for Duel of Aces and Algernon Pulls It Off, with only a small selection of aircraft needing to be painted, while the others I have done get their decals. The last of the aircraft are all bombers or ground attack machines including six RFC Airco DH4's, three Halberstadt CLII's (to replace the ones I stuffed up earlier) and three Friedrichshafen GIII heavy bombers for the Germans.
I also need to assemble and paint a couple of observation balloons as targets but only airborne ones to keep the painting load down to a sensible minimum. I might squeeze in something else, another lone ace in an Albatros perhaps, but I think that's enough for the moment and manageable by the end of the month which I've set as my deadline. In the mood for something naval next....
Wings at War WW2 Game Design
I've been scribbling away at some design ideas for the WW2 Mediterranean / North African Theatre, with a focus on Malta in 1942 and Tobruk in 1941. It's all a bit sketchy at the moment but I think there's something worth developing in both game concepts, with some really interesting elements to play around with and some new mechanics on top of the tried and tested systems in Scramble for Britain, MiG Alley and so on. I need to read around the subject a bit more in both cases, although I do have a good working knowledge to go on, so it's lucky that I have a pretty good stash of reference books to dip into from previous Bag the Hun projects. It's also a great excuse to order more lead!
Tuesday, 20 September 2022
I Hate This Bit
I've started the really fiddly and time consuming task of adding decals to the 1/600th scale WW1 aircraft. I have always found this to be a long and painful job, even if the models look a lot better afterwards, in most cases. Thus far, I have added the upper wing roundels to the RFC scouts and two-seater, which wasn't too bad, but it's the fuselage roundels next and they are microscopic!
Monday, 19 September 2022
1/600th WW1 Mid-1917 Aircraft Painted
Wings at War Tobruk
Sunday, 18 September 2022
Gasbags
Tumbling Dice 1/6000th scale Balloons |
1/600th Neman R-10 Conversion
For the Air War over Khalkhin Gol project there are a small number of aircraft that Tumbling Dice don't have in the available range of models, one being the very obscure Neman R-10 two-seater reconnaissance monoplane, which played a small but active role in the campaign. It's an odd-looking aircraft with a pronounced sweep to the wings and a long dorsal fuselage spine ending in a stubby ball turret, but I really like it.
Neman R-10 |
I have decided to have a go at a conversion job, using a Nakajima B5N Kate (ISA423) as a template. It's not an identical match but has a profile and dimensions that are sufficiently close to make a conversion feasible. I'll see how I get on but it's not an easy job, especially as I need to find a way to model a rear ball turret and reshape the wing plan form with a swept-back leading edge. I foresee lots of models being hacked about and ending up in the bin!
Saturday, 17 September 2022
More Wings at War Mission Cards
Football War Mission Cards |
First World War Mission Cards |
I've been busy today working up the final sheet of mission cards for Duel of Aces and also designing a smaller deck of cards for Corsairs and Cavaliers. The idea is to test out the concept for the Football War while I get my act together and finish painting the WW1 aircraft, making ground targets and working out how to base the observation balloons. The Corsairs and Cavaliers cards also gave me some ideas for amending the bombing rules to include strafing with machine guns and cannons, which I have now implemented and need to playtest. I'm not sure why I didn't include the option of gun runs before but it's an oversight that needed to be fixed. I'll try out the amended rules as soon as I get some time.
Sandbox Skirmish Terraformer Terrain
I was looking at my box of models for the Sandbox Skirmish project the other day, wondering why I hadn't moved it on any further despite my best laid plans. The answer to the question is terrain and how to store it. I don't want to use a cloth, which is my usual approach, but would like something modular to allow me to set it up for scenarios in different configurations.
I'd thought about using the Sally 4th Terraformer system before, having been impressed with Jon's terrain for East Africa that he built with the tiles. However, I was put off by the cost and thought it would be easier just to make something from scratch myself. Now, after seeing some of the modules at Colours and another similar system, I'm having second thoughts.
https://wargamesbuildings.co.uk/product-category/terraformers/
I only need a 2' x 2' size board, with a 3' x 3' one being a maximum, so the starter set of four 12' tiles looks ideal. It consists of a hill side and a river or stream, which is ideal for Aden as the latter would make an excellent wadi. It's forty quid and I'd need to add the cost of the foam and materials, but that's not too bad and comparable to a terrain cloth.
I'll give it some thought but this looks like it might just kick start my project!
Thursday, 15 September 2022
Wings at War Duel of Aces Mission Cards Part II
Here's the second page of mission cards that I've devised for Duel of Aces, once again designed to add some period flavour and focus to the game objectives and to give each player a more challenging experience. I've been thinking that the use of mission cards would be particularly good for multiplayer games, in which each player could be allocated a single mission, allowing up to three players a side to have a really involved role in the game. I'll work up the third set of five pairs of cards tomorrow if I can find the time, although at this point I only have three pairs to go on. I'm sure I can devise a couple more if I put my mind to it.
Khalkhin Gol Japanese Stragglers
Type I (Fiat Br.20) |
Type 98 Ki-32 'Mary' |
A bit more filing, sanding, trimming and gluing yesterday, with the end result being nine Ki-32 Type 98 Mary light bombers and nine Type I (Fiat Br20) medium bombers for the JAAF. The Ki-32's were deployed in the later stages of the Khalkhin Gol campaign but, as I don't have any Ki-30 Ann light bombers, mine will be used right through. They had a reputation for unreliability due to their complex, water-cooled engine but still performed a useful tactical role over the battlefield.
The Type I Mediums, purchased from Italy with a shipment of rice, believe it or not, were a big disappointment for the Japanese and were gradually phased out to secondary roles, being replaced by the Ki-21 Type 97, which is why I have only prepared nine of them rather than a full squadron of twelve. I'll put these to one side for a rainy weekend while I get on with my WW1 aircraft for Algernon Pulls It Off and Duel of Aces.
Wednesday, 14 September 2022
Wings At War Duel of Aces WW1 Mission Cards
I've started work on a deck of mission cards for Duel of Aces, pinching the concept from a post on the Wings at War FB page. The idea with these is to add some focus and period flavour to games by giving each player a set of three missions, selected at random from deck of cards, although I'm adding another layer to this by adapting the AK47 objectives mechanism to make things a bit more unpredictable.
These don't replace the Victory Points and Victory Targets in the game, but a successful mission can give a points bonus on top of the VP's won during the game itself. This is the first hand of cards and will I have another twelve or so to add to the deck once I've typed them up and tweaked them a bit. I really like the idea behind this and, if these ones work, I'm planning to make some more for both MiG Alley and Corsairs and Cavaliers.
Monday, 12 September 2022
Wargame Rules Sell Off
It's been an expensive month or two on the wargames front so time to replenish the coffers with another eBay clear out. This time I'm going to cull the rules collection, with some pretty good stuff up for bids that I just won't ever get round to using, including books and cards for Muskets and Tomahawks, Congo, Infamy, Infamy, Frostgrave and several other popular rules systems. I'll get it all posted up mid-week so will have to get up in the loft to dust the rules off and sorted out. The advantage of rules is that they aren't as heavy or cumbersome as figures, even if they don't make as much revenue when up for sale, so posting them won't be as much of a pain as the lead pile! I might throw in a few old board games too.
Sunday, 11 September 2022
Khalkin Gol Soviet Stragglers
Syborg 3D Long Face Games ACW 1/600th Boats
Armed Riverboat 3a |
I bought half a dozen or so of the 3D printed ACW boats from Syborg 3D at Colours yesterday and I'm very pleased with them. These are from Long Face Games and available as STL files on Wargame Vault but, as I don't have a printer, it's great to be able to buy them as models.
They are nicely detailed and well printed, although a couple will need some minor straightening of funnels and a little tidying up. I bought a couple of transports, a couple of armed transports and an armed riverboat, which will fit very well with my existing lead pile of Peter Pig models. Not cheap but not expensive either, so worth a look.
In fact, I can see myself ordering a whole load more of the Confederate rams, transports and river boats, as they really fill some gaps. This opens up the prospect of a 1/600th ACW riverine project at some point later in the year, or more likely in 2023, which is something I've been meaning to do for ages.
https://www.syborg3dprinting.co.uk/3d-model-store/1-600-acw-gunships-and-steamers
Saturday, 10 September 2022
Copplestone Mongolians
I was really hoping to find some Copplestone Back of Beyond figures at Colours today but they were conspicuous by their absence. In fact, I couldn't find any of the usual racks of Artizan, Copplestone, Brigade or similar that used to be on display at shows, with the whole shopping experience dominated by companies selling their own stuff. It's a bit of a shame that the only stand that had a mix of figures was Colonel Bills, which is a second-hand specialist and even then only one pack of Back of Beyond figures was on offer, not even from Copplestone Castings. Anyway, to cut a long ramble short, I have quenched my thirst for Mongolian irregular cavalry with an order from Sally 4th, where they were a good price and still available. These will be added to my massive lead pile of Back of Beyond figures as a unit for my Chinese Warlord army to deploy.