This is the most straightforward of the three second hand vacform building kits that I found at a car boot sale a while back, so I'm going to have a go at cutting out the parts and assembling it over the next couple of days, just to see how to go about it. I'll use a textured laser cut base with some additional rubble, timbers and other clutter to bed it down, once I know what the footprint is like.
If all goes according to plan, it will be a useful start to the Ardennes terrain for What a Tanker! and could also be re-used for 15mm, as it's fairly scale neutral. I also have some ideas for the basing some fir trees on skirmish bases, with a removable disc base for each tree, which would make storage easier and allow tanks to drive into the woods.
If all goes according to plan, it will be a useful start to the Ardennes terrain for What a Tanker! and could also be re-used for 15mm, as it's fairly scale neutral. I also have some ideas for the basing some fir trees on skirmish bases, with a removable disc base for each tree, which would make storage easier and allow tanks to drive into the woods.
I've made a few amera vac kits & found that thiness of the walls was very disconcerting; I'd recommend thinking of foamboard or similar to bulk them out
ReplyDeleteThanks Colin. Good tip!
ReplyDelete